Beaverton OR Siding Contractor
Trusted James Hardie® siding replacement, waterproofing, and exterior remodeling for homeowners throughout Beaverton, Oregon.
Elite Home Exteriors NW is a local Beaverton siding contractor specializing in complete siding replacement, James Hardie® fiber cement siding, waterproofing, flashing, and dry rot repair. We have completed numerous siding projects throughout Beaverton and the surrounding westside communities, giving us firsthand experience with the siding failures and moisture problems commonly found on local homes.
If your siding is rotting, swelling, cracking, warping, or simply reaching the end of its service life, our goal is to do more than cover the problem with new siding. We focus on the entire exterior wall system—from removal of the existing siding and inspection for hidden damage to weather barrier, flashing, trim, siding installation, caulking, and exterior paint.
As a James Hardie Elite Preferred/Alliance Contractor, Elite Home Exteriors NW specializes in siding systems designed to provide long-term protection and curb appeal for Pacific Northwest homes.
Planning a complete siding replacement in Beaverton? Contact Elite Home Exteriors NW today for a free siding estimate.
[GET A FREE SIDING ESTIMATE]
Replacing siding is one of the most important exterior improvements you can make to your Beaverton home.
Your siding isn’t simply an architectural finish. It is part of a complete system designed to help protect the framing and sheathing underneath from Oregon’s rain and moisture.
At Elite Home Exteriors NW, we specialize in complete siding replacement projects rather than temporary fixes to an exterior that may already be failing.
We commonly replace:
When the existing siding is removed, we can inspect the underlying wall for deterioration that wasn’t visible beforehand. If damaged sheathing, framing, insulation, or other water-related problems are discovered, they can be addressed before the new exterior system is installed.
That approach is especially important in the Pacific Northwest, where hidden moisture damage can develop behind siding long before it becomes obvious from the exterior.
Beaverton’s wet Pacific Northwest environment puts exterior wall systems under constant stress.
Repeated exposure to rain and moisture can become a problem when siding, caulking, flashing, trim, or the weather-resistant barrier has failed or was installed incorrectly.
Many of the siding replacement projects we perform involve more than worn-out siding. After demolition begins, we may uncover evidence that water has been getting behind the exterior for years.
Common problems we encounter include:
Older engineered wood products can deteriorate when moisture reaches exposed edges, joints, penetrations, or improperly flashed areas. Swelling, crumbling edges, soft siding, and peeling paint can all indicate that replacement should be considered.
Cedar can provide a beautiful exterior, but it requires ongoing maintenance. Aging coatings, cracked boards, open joints, and repeated moisture exposure can eventually contribute to deterioration.
Vinyl siding can become cracked, loose, warped, faded, or damaged over time. More importantly, the siding itself doesn’t tell you whether the drainage and flashing system behind it was installed correctly.
Windows, doors, roof-to-wall intersections, horizontal transitions, penetrations, and siding joints are all areas where water management matters.
Missing Z-metal, poorly integrated membrane flashing, inadequate joint flashing, or improperly detailed openings can allow moisture into the wall assembly.
Some of the most significant damage isn’t visible until the existing siding is removed.
We frequently look closely around:
If we uncover damage during your project, we can address the affected areas before covering the wall with new siding.
Learn more about our approach to dry rot repair and siding replacement.
For homeowners looking for a durable, attractive exterior, James Hardie fiber cement siding is one of our primary recommendations for Beaverton homes.
Elite Home Exteriors NW is a James Hardie siding contractor specializing in complete fiber cement siding systems.
James Hardie offers several exterior styles that allow Beaverton homeowners to update their homes while maintaining architectural character.
Popular options include:
Traditional horizontal lap siding remains one of the most popular choices for siding replacement. Cedarmill® provides a wood-grain appearance, while Smooth siding creates a cleaner, more contemporary exterior.
Board-and-batten siding works beautifully as a full exterior or as an accent on gables, entries, garages, and other architectural areas.
Straight Edge and Staggered Edge shake products can add texture to gables and other accent areas without relying on traditional cedar shake.
Fiber cement trim can be installed around windows, doors, outside corners, and other architectural details to complete the siding system.
Homeowners can explore additional product options directly through James Hardie.
The siding you see is only one component of a properly constructed exterior.
What happens behind the siding can be just as important.
That is why our Beaverton siding replacement projects place significant emphasis on the building envelope, drainage, weather barrier, and flashing system underneath the finished siding.
Depending on the project requirements, our siding systems can incorporate components such as:
You can learn more about the components we install on our siding waterproofing and flashing systems page.
A beautiful siding installation is important—but we want the system underneath it built correctly as well.
Not every siding problem means your entire exterior needs replacement, but widespread deterioration can indicate that the siding system is nearing the end of its useful life.
Watch for:
If problems are appearing throughout multiple elevations of the home, complete siding replacement may provide a better long-term solution than repeatedly repairing individual areas.
A high-quality siding project starts long before the first new siding board is installed.
We evaluate the existing siding, trim, visible flashing details, and other areas that may indicate deterioration or moisture intrusion.
The existing siding is carefully removed so we can see the condition of the wall underneath.
Once exposed, we inspect accessible sheathing and wall areas for rot, water damage, or other deterioration.
Damaged materials identified within the siding scope can be repaired or replaced before the new wall system is covered.
A new weather-resistant barrier is installed as required for the project, with particular attention paid to drainage and integration with openings.
Membrane and metal flashing details are incorporated where required to help direct water away from vulnerable areas.
Your new siding and trim are installed according to the appropriate manufacturer installation requirements and project specifications.
Required joints and transitions are sealed, and pre-primed siding projects can be finished with a high-quality exterior coating system such as Sherwin-Williams® paint.
We review the completed exterior and project details before considering the siding transformation complete.
The result is not simply a different-looking house. It’s a new exterior system designed around durability, drainage, weather protection, and long-term performance.
When you invest in a complete siding replacement, choosing the right contractor matters just as much as choosing the siding.
Elite Home Exteriors NW specializes in exterior siding systems throughout the Portland metro area, and Beaverton is an important part of the area we serve.
Homeowners choose us because we offer:
We have extensive experience installing James Hardie siding, trim, panels, shakes, and related exterior components.
We don’t simply list Beaverton as a city we serve. We have completed many siding replacement projects in and around Beaverton, giving us practical experience with the homes, siding materials, and moisture-related problems found in this part of the Portland metro.
We pay close attention to what goes behind the siding—including weather barriers, membrane flashing, metal flashing, drainage, penetrations, and transitions.
Finding rot during siding removal doesn’t automatically stop the project. Addressing hidden water damage is an important part of many complete siding replacements.
We focus on clear communication, detailed scopes of work, and helping homeowners understand the siding system being installed on their home.
Our siding workmanship is backed by our Lifetime Workmanship Warranty for as long as the original homeowner owns the home, subject to the terms of the warranty.
Learn more about our siding warranties.
Elite Home Exteriors NW is licensed, bonded, and insured in Oregon.
Oregon CCB #222790
You can also review our awards, certifications and contractor credentials.
One of the strongest reasons to choose Elite Home Exteriors NW for your Beaverton siding project is simple: we work in Beaverton regularly.
Our experience includes replacing failing engineered wood siding, deteriorated wood siding, vinyl siding, and other exterior systems on homes throughout the Beaverton area.
Those projects have given us firsthand experience uncovering and correcting issues such as:
Every home is different, which is why we evaluate the existing exterior rather than assuming that every siding replacement needs the exact same solution.
Want to see examples of our work? Visit our siding project photo gallery and before-and-after siding projects.
Elite Home Exteriors NW provides siding replacement throughout Beaverton and nearby communities.
Our Beaverton-area service coverage includes homes around:
Whether your home is an older property with failing wood or engineered siding or a newer home experiencing installation or moisture problems, we can evaluate the exterior and recommend an appropriate siding replacement system.
We frequently recommend James Hardie fiber cement siding because it provides a combination of durability, design flexibility, and resistance to common problems such as rot and insect damage. The best siding system for an individual home also depends on the architecture, existing wall assembly, budget, and desired appearance.
Siding replacement costs vary substantially depending on the size and complexity of the home, existing siding material, demolition requirements, trim package, siding style, access, flashing details, painting, and the amount of hidden damage discovered after removal.
The most accurate way to determine the cost is through an exterior evaluation and detailed estimate.
Yes. Replacing aging or failing engineered wood siding is a common type of project for us. Once the old material is removed, we can inspect the exposed wall before installing the new weather barrier, flashing, siding, and trim system.
Hidden damage can’t always be determined before demolition. If rot or damaged sheathing is uncovered, we evaluate the affected area and address necessary repairs within the project scope before covering it with the new exterior system.
Our complete siding replacement projects include the appropriate weather-resistant barrier and flashing system specified for the project. We place considerable emphasis on integrating these components correctly because managing water behind the finished siding is critical.
Yes. James Hardie fiber cement siding is one of our primary siding products, including lap siding, board and batten, panels, shakes, soffit, and HardieTrim products.
Our primary focus is larger siding replacement and exterior remodeling projects where we can address the exterior as a complete system. If widespread siding deterioration, moisture problems, or aging materials are affecting your home, schedule an evaluation to determine whether replacement is appropriate.
For additional questions about siding, waterproofing, warranties, and our installation process, visit our Siding FAQ.
If your Beaverton home has rotting siding, failing engineered wood, deteriorated cedar, damaged vinyl, outdated siding, or signs of hidden moisture problems, Elite Home Exteriors NW can help you determine the right next step.
We specialize in complete siding replacement systems built around James Hardie siding, proper waterproofing, flashing, rot repair, quality trim, and professional exterior finishing.
We have completed many siding projects in the Beaverton area, and we’d be happy to evaluate your home and discuss the options available for your exterior.
Protect your Beaverton home with a siding system built for the Pacific Northwest.
[REQUEST YOUR FREE SIDING ESTIMATE]
[VIEW OUR SIDING PROJECTS]
After you make your design, Be sure to come back to www.EliteHomeExteriorsNW.com for a free quote!
The James Hardie® Siding Designer AI Tool is an innovative visualization tool that allows homeowners to see exactly how different James Hardie siding styles, colors, and textures will look on their home—before installation begins. Using advanced AI technology, the tool creates realistic renderings so you can confidently compare options like HardiePlank® lap siding, Shake shingle styles, Panel Vertical and ColorPlus® finishes, making it easier to choose a design that fits your home’s architecture, neighborhood, and personal style.
Elite Home Exteriors NW 4400 NE 77th Ave #275 Vancouver WA 98662 360-605-9030
Mon – Sat 8am-6pm
Up to date Licensed, Bonded and Fully Insured!
WA ELITEEHE804DF
OR CCB#222790
Google 
Yelp 
BBB 
