Elite Home Exteriors NW

Metal Siding Vs Hardie Board Cost

Hardie Board vs. Metal Siding: Why You Should Upgrade Your Metal Siding Today

Hardie Board vs. Metal Siding: Why You Should Upgrade Your Metal Siding Today

Is it time to replace your home’s siding? It’s old, worn, or just not the look you’re wanting. 

You’ve scouring the Internet, created your Pinterest board, and you think you have a clear winner. “Metal siding! That has to be the way to go.” 

Not so fast.

Metal is durable but not necessarily the best option for your home.  

Even though it sounds like metal would be durable and last for years, that’s not always the case. With a bit of reading, you will see why Hardie Board may be the best choice for your home. 

In this article, you will learn: 

  • Problems with metal siding
  • Specifics of Hardie Board vs. metal siding
  • Advantages of Hardie Board
  • And much more

metal siding vs hardie board

Table of Contents


What Is Metal Siding?

In a residential or commercial building, metal siding is a system of metal panels covering the exterior side of the wall.

While metal siding is commonly only made from steel, you can find metal siding panels made from: 

  • Copper
  • Zinc; or
  • Aluminum

Metal siding dates back to the 1940s, but it grew in popularity in the 1980s. Compared to wood or simulated wood, it provides a more sophisticated and glossy look.

What Are the Problems With Metal Siding?

Before choosing metal siding for your home, you must know there are problems associated with it. Below are some points homeowners should understand before choosing metal siding.

Metal Siding Is Not a Durable Material

A metal panel — especially if made of aluminum — can be dented by hard impacts from: 

  • Tree branches
  • Heavy rain
  • Hail
  • Sports equipment; and
  • Hammers used during installation

When any type of metal is dented, it can be difficult to repair or replace this damage. This is why Elite Home Exteriors NW recommends replacing your metal siding with James Hardie Plank.

Metal Siding Makes Your Home Susceptible to Rot

Because siding is constantly exposed to the elements …

  • Rain
  • Snow
  • Sleet
  • Wind; and
  • Burning sun rays

… it is very vulnerable. 

Rot is one of the biggest problems in siding, especially with metal siding. 

In the same way a soda can sweats, metal siding does the same.

Condensation will build up as the temperature changes. When this occurs, the condensation gets behind the siding and causes rot. 

Metal Siding Is Seen on Older Homes

When steel siding was introduced, it came in two forms: 

  1. Sheet material 
  2. Steel clapboards

Both of these sidings had a rolled, flat finish, which made them less attractive on houses. 

In addition, older metal siding made of steel and aluminum was susceptible to fading because of how they were finished.  

In the 1970s and 1980s, metal siding was commonly used on houses. But it’s now considered an older product that never caught on. 

Be prepared for a more dated look if you plan to purchase an older home with metal siding. 

Metal Siding Does Not Come With a Warranty

Your home’s …

  • Value
  • Curb appeal; and 
  • Efficiency

… can all be improved with siding upgrades — but it can quickly become a costly endeavor. 

Before beginning any upgrades, make sure you prepare for any surprises. 

Warranty protection for siding provides homeowners peace of mind, but metal siding does not come usually with a warranty. 

It’s essential to keep this fact in mind when shopping around for siding. 

Choosing the right siding contractor depends on your vision for your home. You want an exterior product that will protect your home from the elements and increase its value and curb appeal.

Elite Home Exteriors NW can help you with that. 

Are you interested in learning more? Contact us today. 


Metal Siding vs. Hardie Board: Why You Should Consider Hardie Board

Your choice of siding significantly impacts the look and feel of your home, as well as its insulation and durability.

Hardie Board siding is a superior alternative to metal siding for many homeowners.

Cost Of Metal Siding Vs Hardie Board

4 Advantages of Hardie Board

Hardie board siding is so prevalent in American buildings for good reason —  it offers a fine finish and durability. 

Let’s take a closer look at a few advantages of Hardie Board over metal siding. 

#1: Made of Durable Material

If professionally installed and properly maintained, Hardie Board can last up to 50 years thanks to its fiber cement composition.

Fiber cement from Hardie resists:

  • Rain
  • Hail
  • Ice storms
  • Strong winds
  • Snow; and
  • Intense humidity

#2: Protects Your Home From Moisture

Hardie Board doesn’t suffer moisture damage, meaning you don’t have to worry about: 

  • Swelling
  • Rotting; or
  • Warping

To prevent these damages, Hardie Board is installed with a seal underneath.

#3: Provides a Custom Look

When it comes to home exterior upgrades, your home’s appearance probably tops your list of priorities.

 It is easy for a home to look drab when it has: 

  • Sagging wood siding
  • Loose brick
  • Cracked vinyl siding; or
  • Crumbling mortar

Hardie Board is attractive and eye-catching at every angle — so homeowners can be proud of its beauty.

Many colors and textures are available for Hardie Board, making it a popular choice for homeowners who want a custom look or who are looking to upgrade their homes.

#4: Comes With a Warranty

It’s not just that James Hardie promises excellent performance. They back it up with a 30-year, non-prorated, transferrable siding warranty and a 15-year warranty on their ColorPlus finish.

Whenever Hardie Board is installed by their preferred contractors — such as Elite Home Exteriors — it is backed by this impressive warranty

The performance and durability of James Hardie’s products are extremely important to us, which is why our warranties are among the best in the industry.

Metal Siding Vs Hardie Board Cost

Replacing Metal Siding With Hardie Board

Hardie Board siding gives you confidence in the exterior of your home for decades to come. 

Take advantage of James Hardie siding’s low-maintenance performance and eliminate the stress of constant upkeep.

The task of replacing siding on your house is a large one that can be difficult, so it is usually best left to the professionals. When you’re ready, the next step is to connect with a professional to help with your project. 

At Elite Home Exteriors NW, we often replace aluminum siding with Hardie Board. Furthermore, aluminum siding costs more than Hardie Board siding. 

Contact us today to speak with a siding professional. 

Elite Home Exteriors: Skilled ELITE Preferred James Hardie Siding Contractors Ready To Install Your Siding

Having learned more about Hardie Board vs. metal siding, you may be ready to replace your current siding with Hardie Board.

Our team at Elite Home Exteriors NW is here to assist you.

With our James Hardie ELITE siding contractors on your side, getting your home siding replaced will be simple:

  1. Choose the siding of your dreams with our help.
  2. We communicate clearly, so you know what to expect.
  3. You can enjoy your siding for many years with our precision installations.

As James Hardie ELITE Preferred Contractors, we have the following benefits: 

  • The installation of all products will be correctly done to ensure optimal performance.
  • James Hardie’s Siding Installation Best Practices guide our work.

Our family-owned business provides its customers with: 

  • Respect
  • Integrity; and
  • Transparency 

For your free estimate, call Elite Home Exteriors today — and discover what new siding can do for your home.




Posted on by PortlandSEOGrowth
Hardie Board vs. Metal Siding: Why You Should Upgrade Your Metal Siding Today

Comments are closed.

Explore Other Posts